Nitek DVRPTR16 User Manual download pdf (Page 1)

DVRPTR16

16 Video, 2 Data Port Surge Protection

Description

The DVRPTR16 is designed to provide 16 channels

of multi-stage video surge protection as well as 2

channels of data surge protection. It is cost-effective

and ideally suited for protecting multi-input video

devices such as a DVR, multiplexer or matrix

systems. The DVRPTR16 is rack mountable in a

standard 19” rack. It installs in minutes and provides

a single easy access point for grounding. The video

channels use 2.8 volt solid state clamping for

unmatched protection. The data channels are

clamped at 5 volts.

Specifications

Size 1 RU

Connection Video Standard female BNC

Data Screw terminals

Clamping Voltage

Video 2.8v

Data 5.0v

Insertion Loss <0.2dB

Impedance 50 and 75 ohms

Temperature -20°C to +65°C

Frequency DC to 10 MHz

NITEK

De Schans 19-21 2a

8231 KA Lelystad

Tel: +31(0)320-2300005

Fax: +31(0)320-282186

E-mail: [email protected]

WWW.NITEK.NL

USA

5410 Newport Drive, # 24

Rolling Meadows, IL 60008

Phone: (847) 259-8900

Fax: (847) 259-1300

E-mail: [email protected]

WWW.NITEK.NET

EUROPE

INSTALLATION

The DVRPTR16 must be properly installed to insure maximum protection. The function of the

DVRPTR16 is to allow a surge to be routed to ground and to clamp the protected equipment video

inputs to a minimum voltage.

There are three key points to remember when installing the DVRPTR16. First, provide a low

impedance connection between the DVRPTR16 and your protected equipment. This is best done by

keeping the PROTECTED coax cable connections as short as possible, ideally less then 3 feet, and

using a coax with a good braid.

Second, the system should use a single ground point. Connect the grounding stud of the

DVRPTR16 to a single ground point. A single ground point is a proper building ground to which

equipment grounds are connected. Ideally the protected equipment should be isolated from ground.

If the DVRPTR16 and the protected equipment are both grounded you will provide a parallel path to

ground and a portion of the surge current can flow through that path. Additionally, AC power line

protectors should be used to complete your surge protection strategy.

Finally, the UNPROTECTED cables and wires should not be crossed with the PROTECTED

cables and wires. Crossing cables could provide a path for surge currents to bypass the

DVRPTR16. protection circuits.

Rev. 21510

DVRPTR16 1

Summary of Contents

Page 1 - DVRPTR16

DVRPTR16 16 Video, 2 Data Port Surge Protection Description The DVRPTR16 is designed to provide 16 channels of multi-stage video surge protection a

Comments to this Manuals

No comments

Nitek DVRPTR16 User Manual Page 1

Browse online or download User Manual for Hardware Nitek DVRPTR16. Nitek DVRPTR16 User Manual

Summary of Contents

Comments to this Manuals

Nitek DVRPTR16 User Manual Page 1

Browse online or download User Manual for Hardware Nitek DVRPTR16. Nitek DVRPTR16 User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Hardware Nitek DVRPTR16