Nitek EL1551U User Manual Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 9
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
Parts of the EL1551U
Wire and Cable Recommendations: The EL1551U is designed for use with copper based 24AWG
Twisted Pair (CAT3 or CAT5) cable. Other heavier gage wires are possible but the wire must be a
twisted paired cable. The RJ45 network port pin out schemes shall be in accordance with the 568B
standard. The quality of which must be consistent with any reasonably serviceable cable condition.
Cables should be free from damage as in cuts, breaks, or cracks to the outer covering and insulated
shielding which may compromise the signal conductivity of the cable.
For more specific information regarding wire types, gauges, and proper installation techniques
please call Tech Support at (847)259-8900 or (800)528-4343.
Ethernet: The EL1551U is designed to transmit and receive up to 100Mbps of Ethernet data to a
maximum distance of 1,600ft / 500m. Before considering this solution be sure that the cable involved
does not exceed the recommended maximum lengths. If the cable distance value is undetermined at
the time of installation, we recommend the use of a Time Domain Reflectometer (TDR) or other
method to determine the unknown cable distance estimates.
Installation Considerations
UTP Side of Device
Network Port Side
10/100 Link LED Indicator
On Solid = 100Mb
Flashing = 10Mb
Off = No Link
Link Status LED Indicator
On Solid = Ethernet Link
Off = No Ethernet Link
Power LED Indicator
On Solid = The Unit is powered
and ready to use
Off = The unit is not powered
PoE Out LED Indicator
On = PoE is being provided
out the network port
Off = PoE is “not” being sent
out the network port
UTP Connector
Attaches to twisted
pair wires
Optional Power Input
Class II 48-56VDC input to create PoE
in installations where a PoE switch is
not available.
On Receiver used to power the system
when a PoE switch is not available.
On Transmitter used to provide greater
PoE power out the network port.
Page view 2
1 2 3 4 5 6 7 8 9

Comments to this Manuals

No comments